Nano ICU
Epoxy-coated Steel tuve frame. Incorporation of four sockets that allow the adaptation of accessories (IV pole, lifting pole, etc.)
Four bumpers located at the corners of the mattress, integrated in the same, which prevents structural damage and reduces the required space.
Comfort
Base cover in ABS for easy cleaning. Its designed to accommodate patient objects and 02 bottle holder. Useful Surface 100%
Handling
Backrest section adjustment (semi-fowler position) and leg plane (fowler position) using a specifically designed crank for less effort.
Pneumatic Trendelemburg and reverse trendelemburg (±7º / 18º) through manual crank. Height adjustable hydraulically by bilateral pedal.
Central and steering brake system with wheels of a diameter of 125 mm, integrated in the structure, which facilitates the process of cleaning and disinfecting it.
Security
Brake control via pedal with 3 position indicator system (full brake, directional brake and brake released). Sliding siderails from a single point, with shock absorbing system. Adjustable to 7 positions. The height of the side rails from the bed is a 62,5 cm.
360º peripheral visión thanks to its siderails made of a transparent material, free of spaces to avoid entrapment.
The NANO cot conforms to Directive 93/42/EEC.
It has all the safety distances between the sections to avoid entrapments.
Nano Care
Epoxy coated steel tube frame. Complete with supports for accessories (IV pole, lifting pole, etc.)
Comfort
Two independent sections made of HPL. Useful Surface 100%.
Sections adjustment accomplished by low tension electric motors, in compliance with standard rule EN 60601-1.
Handling
Patient handset with clear drawing and pictograms for an easy use. Electrical height adjustment ranging from 62 cm to 92 cm by electric actuators.
Trendelemburg y antitrendelemburg (±16º) through electrical actuation system.
Ø125 mm castors con with central braking system and steer facility.
Four bumpers on each corner of the bed base.
Security
Steel side rails with sliding adjustment up to 7 different positions allow an easy access with a system to avoid accidental reduction. Head and footboards covered with transparent plastic sheets 6 mm thick.
Quick emergency release backrest dropping system in the event of electrical or battery back-up failure.
Nano cot is manufactured under the directive 2007/47/CEE.
Galaxy Mini
Epoxy coated steel tube frame.
Easy fixing of head and foot board without the need of tooling system.
Complete with Support for accessories (IV drip rod, lifting pole, etc).
Mattress retainers of both sides to avoid unwanted movement of the mattress. They contribute to place the lying surface sections correctly.
Scissor-lift raising system for greater stability and load up to 180 kg.
Comfort
Four independent and removable sections made in compact HPL.
Useful surface: 100%.
Built in bed extension 20cm (optional).
Bed base profiling by means of low voltage electric motors in compliance with standard rule EN 60601-1.
Mechanically operated footrest independent of kneebreak, providing a greater ergonomy.
Cardiac chair position to make the patient's care more comfortable (cardiology, asthma,etc.).
Electrically adjusted Trendelemburg and reverse trendelemburg (+- 16º).
Electrical height adjustment ranging from 375 mm to 775mm.
Handling
150mm castors with central braking system and steer facility.
Patient handset designed to allow an easy and quick positioning of the bed sections.
Bottom thermoplastic panels protect the bed mechanism and facilitate the cleaning.
Security
Handset lockout facility for exclusive use of medical staff; it permits optional enablement and disablement of the bed functions.
Emergency release of backrest (CPR) for quick lowering of the section in the event of an emergency, battery or power failure. Anti-trapping system that automatically stops the motor on detecting an obstacle. Height adjustment actuators fall-preventer in case of failure.
Security distance between the joint sections to avoid trapping.
4 bumpers to avoid damages. Each bumper located in each side corner.
Optional fixed side rails on headrest section to cover the whole length (100%) of the bed.
Nanp Pediatric
Epoxy-coated steel tube frame. Complete with IV drip pole mounts.
Comfort
Two independent sections made of epoxy coated enamelled steel sheet.
Use surface 100%. Backrest adjustment by means of a spindle specially designed for effortless opetation. Pneumatically -driven Trendelemburg/reverse Trendelemburg position to +-13º Fixed height: 740mm.
Handling
Two independent sections made of epoxy coated enamelled steel sheet.
Use surface 100%. Backrest adjustment by means of a spindle specially designed for effortless opetation. Pneumatically -driven Trendelemburg/reverse Trendelemburg position to +-13º Fixed height: 740mm.
Security
The NANO cot conforms to Directive 93/42/ECC.
Appropriate safety distances at section joints to prevent pinching (Antientrapment system). Four buffers (one on each corner of the bed base).
Sliding siderails made of a steel frame and 6mm thinck methacrylate boards provide easy access.
Neo Care
STEL: Epoxybelagt stålrørramme. Justering af gasstemplets højde med en håndtag placeret på understellet.
KOMFORT: Aftagelig methacrylat holder.
BETJENING: Pneumatisk drevet Trendelenburg / revers Trendelenburg position til + - 13 º. Pneumatisk betjent højdejustering fra 640 mm til 940 mm. Fire svinghjul med 65 mm diameter (to bremsehjul, to frihjulshjul) sikrer.
SIKKERHED: Let manøvredygtighed af barnesengen. NEO-barnesengen er i overensstemmelse med direktiv 93/42 / EØF.
Contact us.
- Phone